10T/D wheat flour milling machine
It is the upgrade of small roller mill 6F series. Instead of manual feeding during each cycle of milling,this machine is pneumatic lifting for the reason of high pressure air blower application and small tank with two bins as a shift surge one. It can save a lot of labor force which can increase the milling capacity at some degree.
After correct installation and debugging, check if the release handle of mill roller is in the release position. Turn on the fan motor and roller mill motor.
Pour wheat (≤150kg) into storage box , then turn 5(discharging handle for bin) to the left, so as to discharge wheat from and suck out to 12, then discharge into 7 via 9. Switch on the release handle of mill roller, and wheat flour milling process begins. The grinding degree can be adjusted by the space between the grinding rollers, and the feeding capacity can be adjusted by 4.
The processed wheat is drawn into 11, and then discharged into 6 via 8. Through 6, wheat flour is brushed out and discharged from b, while the oversize continues to be processed by 3 into storage box . After all the wheat in bin has been ground, turn 5 to the right so as to close and open , which starts the next round of grinding. After all the material in has been ground, the residue in will be sucked into the grind roller, and screened for the oversize in this round into , and start regrinding again.
If repeat the regrinding cycle 3 times, the flour yield will reach 65%-70%, with the wheat flour whiteness over 70; and if 4 times, the flour yield will reach 72%-78%, with the wheat flour whiteness about 60-65.
After regrinding, adjust 3 to discharge the oversize product (wheat bran) into bin , then the wheat bran can be collected through bran outlet a. If keep the machine working continuously, just add materials directly to the empty bin , then the machine will continue the grinding and regrinding process without rest.
To finish the grinding, first switch off the release handle of the grinding roller to avoid damage caused by idling. Then turn off the flour mill motor, and turn off the fan motor after no material is being screened out. Tidy up the machine and wait for the next boot.
Mini wheat milling machine specification
Model Capacity(kg/hr) Power(kw) Weight(kg) Size(mm) 6F-35 300 7.5+2.2 900 2450x950x3300 6F-40 400 11+2.2 950 2500x950x3300 6F-50 500 15+2.2 1000 2600x950x3300
Please Feel free to give your inquiry in the form below.We will reply you in 24 hours.